Plug-in
2ch Digital Indicating Controller |
@ |
| WCL-13A |
Features
EUser defined
combinations
| @ |
The following can be selected. |
| @ |
2ch controller spec. |
@ |
| @ |
Controller+Timer spec. |
CH1 timer |
| @ |
@ |
Delay timer |
@
ESpace saving
| @ |
2ch, but so compact !
Economizes the control panel. |
| @ |
30 x 85 x 108mm (WxHxD, including the socket)
|
| @ |
External
dimensions |
@ |
@
EEnergy saving
| @ |
Auto-light function |
| @ |
Display brightness is controlled after measurement from the
front light sensor. This saves energy when connecting multiple
units.
|
| @ |
@ |
@ |
| @ |
Display-off function |
| @ |
Displays are turned off when operation
does not occur for the time set during Indication time setting.
PV, SV or no indication is selectable during Display selection
mode by keypad. |
| @ |
@ |
@ |
EI/O for each
channel is individually selectable.
| @ |
Input |
| @ |
Individually selectable from thermocouple,
RTD, DC current, DC voltage for each channel. Also infrared
thermocouples (RD-300 series, RD-401) are usable.
(e.g.) CH1 input: Thermocouple
@@@ CH2 input: DC voltage |
| @ |
@ |
@ |
| @ |
Output |
| @ |
Selectable from Relay contact, Non-contact
voltage and DC current output.
(e.g.) CH1 control output: Relay contact output,
@@@ CH2 control output: DC current output |
| @ |
@ |
@ |
EInput sampling period selectable
| @ |
Selectable from a choice of: 25ms, 125ms, 250ms via keypad.
High accuracy control can be performed by selecting optimal
sampling period.
|
| @ |
@ |
@ |
To the top of
this page
|
