System configuration


  Monitoring and setting via Shinko communication converter IF-400


      


The IF-400 can be used as a repeater as well as a communication converter.
A maximum of 95 NCL-13A units (communication line Max. 4.8km) can be connected
using the IF-400 as a repeater.


      

  
The Monitoring software SWM-NCL01M can be used for monitoring and setting of the NCL-13A.


Features

Small, space saving
17.5 x 75 x 85mm (W x H x D)
Easy mounting to the DIN rail.
Its compactness also allows easy mounting in limited space.


    Dimensions (Scale: mm)
      


Reduced wiring
Bus plugs enable multiple connection of the NCL-13A units. The power and communication
lines are connected via a screw type plug for lines through the bus plug of the NCL-13A.


      

  
A screwless spring type plug is used for input and output.
The plug is also removable from the NCL-13A unit for wiring.


      


Multi-input, High-speed sampling
18 types of input such as thermocouple (10 types), RTD (2 types), DC current (2 types)
and DC voltage (4 types) are available.
The NCL-13A can perform temperature control for various machines such as injection
molders, extruders, packagers, bag makers, dryers and electric furnaces.
A fast 0.25 second sampling period allows applications for various processes.

Enhanced communication functions
Shinko protocol and Modbus protocol (Modbus ASCII, Modbus RTU) are usable.
Instrument numbers can be set by the Rotary switch, and communication protocol
can be selected by the DIP switch.

      


Monitoring software
The monitoring software SWM-NCL01M has functions such as all channels display,
one channel display, data logging, setup, all settings at one time, etc.

Main display	Bar graph display
1 channel display	Setting display
Chart display	Logging display
All channels setting display