Digital indicating controllers
FCD-13A	JCD-33A	MCD-100 (2007.12 Discontinued)
Programmable controllers
PCD-33A		PC-935

    
Comes with handle, placeable everywhere, and can be used easily after connecting to the sensor, power supply, heater, etc.

Wiring example



    
To the top of this page




・Specifications

・Rating

Control system	Specify from the below. ・Zero volt switching control system (built-in SSR) ・Phase conrol (Power control unit built in.)
Control current	Specify from the below. ・15A ・30A
Input	Specify from the below (Refer to each controller.) ・Thermocouple: K, J, T, E, N, PL-2, R, B, S, C , etc.(External resistance: 100 or less) ・RTD: Pt100 3-wire system(Resistance: 10 or less per wire) Even if a multi input range controller is mounted, input change is impossible.
Accuracy (setting・indication)	Refer to each controller's individual accuracy.
Power supply	Specify from the below. 100V AC or 200V AC 50/60Hz Allowable voltage fluctuation range: Within 10％ of the Rated voltage

Insulation resistance	20M or more, at 500V DC (Voltage cannot be applied between power terminal−load terminal)
Dielectric strength	Input terminal−Ground terminal, Input terminal−Power terminal----- 500V AC for 1 minute Load terminal−Ground terminal, Power terminal−Ground terminal----- 1.5kV AC for 1 minute

Overcurrent blocking	Circuit protector for semiconductor
Ambient temperature	0 to 40
Ambient humidity	35 to 85%RH (non-condensing)
Weight	BC-100 series----- Approx. 5.5kg BC-200 series----- Approx. 5.8kg
Accessories	Instruction manual 1copy

To the top of this page




Terminal arrangement




Dimensions (Scale: mm)

      BC-100-S series
      


      BC-200-H series
      


To the top of this page