Shinko Technos for temperature and humidity control
Japanese
SHINKO TECHNOS CO., LTD.
Contact
HOME Company Profile Quality&Environmental Activities Products Support&Downloads Applications
2-Point Power Control Unit
APR-102 Discontinued
-2 individual displays/outputs, 2 output ON/OFF keys built-in
-Wide variety of usage as a power control unit
APR-102_photo


Features

2 individual displays/outputs, 2 output ON/OFF keys built-in
2-point individual displays/outputs,
2 output ON/OFF keys - easy to use

Traditional power control unit
APR-102
Power_controller_image






APR-102_photo

Merits of the APR-102
2 individual displays make electric energy calculation convenient
High accuracy signal output
2 individual output ON/OFF keys for CH1/CH2

Wide range of usage as a power control unit
The APR-102 can be used for the following usage.
Air fan
Motor rotation control
Incandescent dimming
Heater power control


Spec

Rating
Input voltage 190 to 250V AC 50/60Hz (unit and load power input)
Output voltage Voltage corresponding to phase angle 0 to 166 degrees
Output current 0.2 to 2A AC (Max. 3A AC)
Voltage indication Voltage corresponding to phase angle 0 to 166 degrees (Indication error: Within 10% of input voltage)

General structure
Case material Flame-resistant resin
Case color Black
Panel Membrane sheet
Dust-proof/Drip-proof IP66 for front face
Display Output voltage display (CH1, CH2): 7-segment, red, 3-digit numeric value indication
Character size: 8x4mm (HxW)

Installation specifications
Dimensions 48x96x110mm (WxHxD)
Mounting Flush
Weight Approx. 250g
Power consumption Approx. 12VA (Inner power consumption when each load is 2A AC)
Ambient temperature 0 to 55
Ambient humidity 35 to 85%RH (Non-condensing)
Accessories Instruction manual: 1 copy, Mounting brackets: 1 set

Setting structure
Output voltage setting Sets the output voltage using the UP/DOWN key, while viewing voltage indicated on the Output voltage display.
Setting range Voltage corresponding to phase angle 0 to 166 degrees
Output ON/OFF By pressing the output ON/OFF key, output is turned ON or OFF for CH1 or CH2.
For output ON, output voltage is indicated on the CH1/CH2 output voltage display.
For output OFF, [ ] is indicated on the CH1/CH2 output voltage display.

Load burnout indication

If load (heater) is burnt out, and if output is turned on,
[ ] flashes on the CH1/CH2 output voltage display.

Insulation, dielectric strength
Insulation resistance 10M or more, at 500V DC
Dielectric strength Power terminal - Ground terminal: 1.5kV AC for 1min
Output terminal- Ground terminal: 1.5kV AC for 1min

TOP

Terminal Arrangement

Terminal arrangement
APR-102_terminal
AC INPUT Power supply
LOAD1 Load 1
LOAD2 Load 2
GND Ground

TOP

Dimensions

External dimensions (Scale: mm)
APR-102_external_dimension

Panel cutout (Scale: mm)
APR-102_panel_cutout

TOP

Names of Sections

Names of Sections
APR-102_name_of_sections
(1) CH1 output voltage display Indicates CH1 output voltage.
(2) CH1 output ON/OFF key Turns CH1 output ON or OFF.
(3) CH1 output voltage DOWN key Decreases CH1 output voltage.
(4) CH1 output voltage UP key Increases CH1 output voltage.
(5) CH2 output voltage display Indicates CH2 output voltage.
(6) CH2 output ON/OFF key Turns CH2 output ON or OFF.
(7) CH2 output voltage DOWN key Decreases CH2 output voltage.
(8) CH2 output voltage UP key Increases CH2 output voltage.

Products
Temperature & Programmable Controllers
Signal
Conditioners
System Products,
Comm. Converters
Indicators
Recorders,
Data Loggers

Portable, Other
Input Devices
Output Devices


TOP

Downloads Catalogs Contact

HOME | Company Profile | Quality & Environmental Activities | Products
Support & Downloads | Applications | Discontinued Products
CE conformity & UL Approved Products | RoHS Directive | Privacy Policy | Terms of Use
Japanese | Sitemap
Copyright (C) 2003-2018 Shinko Technos Co., Ltd. All Right Reserved.